Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Siemens DX Messenger Programming

Status
Not open for further replies.

telecoman

Technical User
Aug 25, 2007
34
GB
Hi there all,

I have here a Siemens DX Messenger card.
When I dial the Messenger via the hunt group or a port I receive the reply "Your call is being transferred to the operator".
I would like to change this to the message "Welcome to the Messenger System - please enter extension number followed by hash", which I believe is the default.
Despite looking at several electronic documents on the DX Messenger, I am unable to find clear information on how to do this!
Could anyone out there help please?
Regards to everyone,
Telecoman. [ponder]


 
Never done it, but this is from the book....

Dial the messengers hunt group number
When the machine answers key 0 # “system administration prompt”
Enter the security code followed by # “menu options played”
Though it is not an option on the menu now press 9 “ a warning is now given
Programming options played.

----------------------------------------------------------


Changeing the Greeting on an auto-attendant


Log in
Key 3 for auto attendant
Choose auto attendant 1, 2, 3, or 4
Choose day or night menu
Key 6 to modify
Don’t make any changes, but exit by keying * #
Now you can record a new greeting/prompt key 1

Mal.

Latest Manuals:-

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top