Shutting Down an Interface at Certain Times 3

[Intex2002]

Hi

I have a Cisco 2600 running v12 IOS. I wondered whether there is anyway to shutdown an interface at a specific time and then bring it up again at another time.

Basically I have an ISDN line that stays up all the time and I want to shutdown the link say between 19:00 - 07:00 hours.

Any help greatly appreciated

 

[wybnormal]

There are several timer programs that I know of which can do this. Or WinBatch can do it by script. Check out Cat Tools by Kiwi software.. you can send commands to the router based on time of day.

Perhaps someone knows some Cisco magic with the IOS itself?

MikeS
Find me at

http://www.packetattack.com

"The trouble with giving up civil rights is that you never get them back"

 

[Intex2002]

Thanks for your help. I'll certainly give that a try

 

[MJewell]

ohh... Just tried the Kiwi CatTools on my 2922c's, 2924XLM and my 3548's... I like that.... Thanks
-Mike

 

[espIKEkid]

You can do it on the router... good old access-lists

access-list 100 permit ip any any time-range only-during-open-hours

access-list 101 permit ip any host 255.255.255.255 time-range only-during-open-hours

time-range only-during-open-hours
absolute start 00:00 01 January 2001
periodic weekdays 7:30 to 18:30
periodic Saturday 8:30 to 13:30
periodic Sunday 8:30 to 18:30

Have fun!!!

 

[saleen351]

try this link.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t1/timerang.htm