Shortcode to change SIP ID

[Samoht2]

I've got 4 location registered at a main site.
On the main site there is an IP500 with a SIP line and a BRI line.
The SIP line has got 2 diffent numbers

At location 1 people dial out from the BRI line with number 1xxxxxxx
At location 2 people dial out from the BRI line with number 2xxxxxxx
At location 3 people dial out from the SIP line with number 3xxxxxxx
At location 4 people dial out from the SIP line with number 4xxxxxxx

Now I want the workers on location 3 to dial out with the number of location 4 with a button
Reason is people thinks he is at location 4 instead of location 3

Changing the dialing- out number on a ISDN BRI line is not a problem
But how this is done with a SIP trunk since I configured the SIP trunk and numbers via the user data.

 

[IPOfficeIreland]

1 create a new sip uri and instead of "User Data" put in the number you want to present.

2 Create a unique Trunk Group for this URI

3 Create a ARS with Secondary dial tone

4 Create a short Code to Access this ARS

5 Put the dial button on the users phones to access this ARS

6 In ARS set up the SIP Dial patterns

7 User presses or dials short code, then dials number as needed.

Notes:

Depending on your sip config you might could set these URIs in each system rather than trying to use the resources of the SCN.

Let me know how you progress!

 

[Samoht2]

Thanx,


I'll try this tomorrow and let you know

Cheers