Jkellyvota
IS-IT--Management
I want to set a short code call it *85 to dial 4 short codes simultaneously so I can set 4 groups out of service at the same time. Is this possible
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
short code to a bunch of short codes
- Thread starter Jkellyvota
- Start date
- Status
You can't have one short code trigger multiple other short codes to the best of my knowledge.
If you put a Night or an Out of Service button on a phone and leave the additional data blank (don't specify a group) it will change the status of every group for which that station is a member.
There is also a way to use a Generic Action as a test in Voicemail Pro so that it checks the status of another group and routes the call accordingly. So one Night button can effectively put multiple groups into Night service. I would have to look up how to do this again or log into a system where I set this up to remember how I did it though.
If you put a Night or an Out of Service button on a phone and leave the additional data blank (don't specify a group) it will change the status of every group for which that station is a member.
There is also a way to use a Generic Action as a test in Voicemail Pro so that it checks the status of another group and routes the call accordingly. So one Night button can effectively put multiple groups into Night service. I would have to look up how to do this again or log into a system where I set this up to remember how I did it though.
- Thread starter
- #3
Jkellyvota
IS-IT--Management
thank you I'll try the blank data the sales guy didnt sell them vm pro
you can create 4 bogus users, forward each to a short code, add those users to a group and create a button for that group 
That should work I think.
______________________
|........................................|
|.....i.eat.bunny.children......|
|______________________|
(\__/) ||
(•Y•). ||
/ < )<||
That should work I think.______________________
|........................................|
|.....i.eat.bunny.children......|
|______________________|
(\__/) ||
(•Y•). ||
/ < )<||
use the twinning feature
create an incoming call route to FNE00 that give you the dialtone
then create 1 shortcode set HG night service with a blank extension number and when you dial in and get the dialtone just dial it.
Prerequisite that the person with the twinning is in all those groups.
Never done it but should work
Joe W.
FHandw, ACSS (SME)
"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter
create an incoming call route to FNE00 that give you the dialtone
then create 1 shortcode set HG night service with a blank extension number and when you dial in and get the dialtone just dial it.
Prerequisite that the person with the twinning is in all those groups.
Never done it but should work
Joe W.
FHandw, ACSS (SME)
"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter
intrigrant
Systems Engineer
You can program a button type dial and dialnumber *20*group1#*20*Group2#*20*Group3#*20*Group4# and another button to do the opposite.
But using VMPro is a better solution.
But using VMPro is a better solution.
- Status
Similar threads
- Question