Sharing SLT on 0x8 1

[sentel]

I have a customer that is close to maxing an mics 0x32. We have installed two 0x8 analog station mod. (looped). Five or six of the devices are outgoing fax only. Does anyone know of a good solution to share these without disturbing the communications between faxe machines.

I am not looking at adding ATA's on the dig port side. The resources for dig stations are limited as well.

Sola Scriptura

http://www.Sentry-Telecom.com

 

[nortelnorstar]

you can use line share devices such as "the stick" between your analog devices and the ASM ports...

Marv

http://www.telemarv.ca

 

[bkrike]

This brings up a thought in my mind that I have never tested: Does anyone have an ATA running multiple devices: For instance an analog phone and a loud ringer? Do they have enough output to make both ring?


Telemarv!? Good to have you back.

 

[phitzer]

yes
i have a site with multiple 2500s off single ata works fine!

 

[bkrike]

thanks drdebug

 

[sentel]

I was more concerned ,Not about sharing but, butting in on a fax in use. I have used "the stick" in the past a have trouble at some point or another with it. This site can't afford to have those issues.

It seems like viking makes an in-line sharing device cord or something. Anyone tried this.





Sola Scriptura

http://www.Sentry-Telecom.com

 

[tsplusone]

You could use a "Line Eliminator" to control butting-in on a fax in use. I have used them in the past & they work fine.

 

[nortelnorstar]

Line eliminator works well...

Yes Bk it me.

Marv

http://www.telemarv.ca

 

[Serenitynow109]

We use a TG-1 device by Viking. Check out this link

http://www.twacomm.com/Catalog/Model_TG-1.htm