One more thorn in my side since installing WinXP. I have 2 printers installed using the same LPT port (1) that I switch back and forth using a data transfer switch. Now that I have XP, it appears that my default printer has designated access to that port, and the secondary printer is chopped liver. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
sharing printer port with XP??
- Thread starter katx3
- Start date
Jakespeare
Vendor
Yes. If you have an OLD mechanical switch, the A B C switch,
replace that with an electronic one, like a Belkin.
Also, I really see no reason why 2 printers wouldn't work;
That is, if they are BOTH XP compatible. Many printers that are only 1.5 years old, or older are NOT supported by the manufacturers.
* Could this be a driver issue with printer # 2 ?
replace that with an electronic one, like a Belkin.
Also, I really see no reason why 2 printers wouldn't work;
That is, if they are BOTH XP compatible. Many printers that are only 1.5 years old, or older are NOT supported by the manufacturers.
* Could this be a driver issue with printer # 2 ?
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question