Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Several handhelds scanner

Status
Not open for further replies.

donporter

IS-IT--Management
Aug 6, 2004
140
0
0
US
I want to try to get several of my handhelds up to always be on. HHP IT300 and Symbol LS1908.
I want it to be ready or lit at the max seconds.
can someone help?
 
donporter

I use the LS2208. It came with a product manual on cd. In the manual there is a bar code for "Always On". I printed the page and scanned it, worked fine.
I assume that the LS1908 has something similar or could be downloaded from the Symbol site. Can't help with the HHP.

Gook Luck
Tom
 
They are not new but I will look around here. Then I will look again online.
 
I am not sure of IT300, But we can keep the scanner on By programming it , you can try scanning the "Streaming presentation Mode " barcode.
Device will be always on and searches for the Barcodes ,when ever the barcode is comes in the field of view it reads it immediatly.

hope this will solve your problem . please reply back

Regards
HHPuser
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top