Setup Private Line 2

[FlashofOhio]

I have an installed BCM400 that was not setup with a private line for one of the DN's. All the other numbers coming into the phone room are in a Hunt Group except for the 2 analog lines. I need to assign a private phone number for one of our executives, have it ring on the T7316E handset and be indicated on the display as a private line call. Is there an easy way to accomplish this? I also don't know how to find the private line DN in the active lines. Any help is greatly appreciated.

 

[REJ1968]

Just assign the line to appear and ring on his set only. Make sure he is the prime set for this line. You can also name the line.

 

[Signo]

FlashofOhio,

Go to:

Telephony Services --> Lines --> Physical Lines --> Enabled Physical Lines --> The line you want --> Trunk line data -- there you will see "Line type" in the drop down is a selection for "Private to:".

Hope that helps.

Signo

 

[oneofthegirls]

If you assign a line as "Private to". the end user cannot even transfer the line to anyone else if they wish. Make it public and only assign it to his set and no one else.

 

[cook1082]

It sounds that these are analog lines .Is this line a stand alone line no hunt. If the line is busy it will get a busy tone from the phone co.

 

[acewarlock]

in a Hunt Group except for the 2 analog lines"

What are the other line types if not Analog?

 

[cook1082]

Sorry dude can't read.
I've noticed that poeple can be sarcastic on this forum.More than others.
Can't we all just get along.