Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Setup LG IPLDK 20 for Home Office use only 1

Status
Not open for further replies.

harding87

ISP
Oct 5, 2017
3
GB
Hi Everyone.

I have just joined the forum, so please take it easy :)

I have just started a company and purchased a LG IPLDK 20 - refurbished.

Had a look and no clue how to setup, i am normally good with these things. I am looking to use for home use and setup 3 phones, each having there own extension - just wanting to setup in analogue as voip is not required
this is the picture of the back of my IPLDK
ipldk_i4uemp.jpg


Any help setting up - where the lines go etc will be helpful

thank you for reading
Michael
 
Hi
lines go in lco1,lco2 pins 1&2 and 4&5.
MBU MJ1(CO)
Connector Socket Pin Number NO SIGNAL NAME
RJ45

1,2 CO-R, CO-T
3 Reserved
4,5 CO-R, CO-T
6,7,8 Reserved

extensions in dkt1,2 etc pins 4&5 (centre pair)
Connector Socket Pin Number NO SIGNAL NAME
RJ45

1,2,3 Reserved
4,5 DKT-R, DKT-T
6,7,8 Reserved

Programming
1 turn battery on
2 set country code (pg100) = 61 australia
3 reset system
4 dip switch on ( 4)
5 initialize system (pg450)
6 reception on 2nd port
7 prog lines (pg140-f1,cidu pg185 f1=on,f4 bin0=co1,bin1=co2,bin2=co3,bin3=co4,f7 on.
pg142-f13)
8 prog pick up grp (pg190)
9 prog moh (pg171)
10 prog time (pg178)
11 prog phone flex buttons (pg115)
12 prog p/w (pg162)
13 prog paging (pg111 f8)
14 remove auto hold (pg112 f2)
15 prog vmib (pg113 f2)
16 prog admin (pg113 f1)

this should help

 
Hi Pommiekev

i have a dial tone, thank you.

Now to programme in UK, where do i find the list for these codes?

you helped a million, thank you.

Kind Regards
Michael
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top