Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
setup error 278
- Thread starter avee8tor
- Start date
You didn't indicate what Service Pack for VFP 6.0 you are running (3,4,5?). If you haven't at least applied SP3, make sure you get the Setup Wizard Updates available at .
Rick
Rick
jmcfarlane
Programmer
I am running with service pack 5 on VFP6 on Windows NT 4.0 SP6a and got the problem. Does any have a suggestion?
jmcfarlane
Programmer
I did say that I was using service pack 5 of VFP6 on Windows NT 4 SP6a platform.
The solution to the problem was that the icon I was attaching in the setup was within the distribution tree I was using, you must select the icon outside the distribution tree and it will work fine.
Jason
The solution to the problem was that the icon I was attaching in the setup was within the distribution tree I was using, you must select the icon outside the distribution tree and it will work fine.
Jason
- Status
