Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Setup a SIP trunk from UCx250 to IPO500V2 errors 1

Status
Not open for further replies.
MoJHK

MoJHK

Systems Engineer
Nov 16, 2017
180
HK
Dear Expert,

I tried to setup a SIP trunk from UCx250 to IPO500V2 but I got the following error message from logs:

[2024-01-18 17:23:40.071] VERBOSE[6517][C-0000000a] pbx.c: Executing [tdial@ext-trunk:7] Set("UCX/750@750-00000009", "DIAL_NUMBER=") in new stack
[2024-01-18 17:23:40.071] VERBOSE[6517][C-0000000a] pbx.c: Executing [tdial@ext-trunk:8] GosubIf("UCX/750@750-00000009", "1?sub-flp-3,s,1()") in new stack
[2024-01-18 17:23:40.072] VERBOSE[6517][C-0000000a] pbx.c: Executing [s@sub-flp-3:1] ExecIf("UCX/750@750-00000009", "0?Set(TARGET_FLP_3=)") in new stack
[2024-01-18 17:23:40.072] VERBOSE[6517][C-0000000a] pbx.c: Executing [s@sub-flp-3:2] GotoIf("UCX/750@750-00000009", "0?match") in new stack
[2024-01-18 17:23:40.072] VERBOSE[6517][C-0000000a] pbx.c: Executing [s@sub-flp-3:3] Return("UCX/750@750-00000009", "") in new stack
[2024-01-18 17:23:40.072] VERBOSE[6517][C-0000000a] pbx.c: Executing [tdial@ext-trunk:9] Set("UCX/750@750-00000009", "OUTNUM=") in new stack
[2024-01-18 17:23:40.072] VERBOSE[6517][C-0000000a] pbx.c: Executing [tdial@ext-trunk:10] Set("UCX/750@750-00000009", "DIAL_TRUNK_OPTIONS=Tt") in new stack
[2024-01-18 17:23:40.072] VERBOSE[6517][C-0000000a] pbx.c: Executing [tdial@ext-trunk:11] Dial("UCX/750@750-00000009", "SIP/to_IPO/,300,Tt") in new stack
[2024-01-18 17:23:40.073] VERBOSE[6517][C-0000000a] netsock2.c: Using SIP RTP TOS bits 184
[2024-01-18 17:23:40.073] VERBOSE[6517][C-0000000a] netsock2.c: Using SIP RTP CoS mark 5
[2024-01-18 17:23:40.123] ERROR[6517][C-0000000a] netsock2.c: getaddrinfo("to_IPO", "(null)", ...): Name or service not known
[2024-01-18 17:23:40.123] WARNING[6517][C-0000000a] chan_sip.c: No such host: to_IPO
[2024-01-18 17:23:40.123] NOTICE[6517][C-0000000a] app_dial.c: Unable to create channel of type 'SIP' (cause 20 - Subscriber absent)
[2024-01-18 17:23:40.123] VERBOSE[6517][C-0000000a] app_dial.c: Everyone is busy/congested at this time (1:0/0/1)
[2024-01-18 17:23:40.123] VERBOSE[6517][C-0000000a] pbx.c: Executing [tdial@ext-trunk:12] Set("UCX/750@750-00000009", "CALLERID(number)=750") in new stack
[2024-01-18 17:23:40.123] VERBOSE[6517][C-0000000a] pbx.c: Executing [tdial@ext-trunk:13] Set("UCX/750@750-00000009", "CALLERID(name)=Pan 750") in new stack
[2024-01-18 17:23:40.123] VERBOSE[6517][C-0000000a] pbx.c: Executing [tdial@ext-trunk:14] Hangup("UCX/750@750-00000009", "") in new stack
[2024-01-18 17:23:40.124] VERBOSE[6517][C-0000000a] pbx.c: Spawn extension (ext-trunk, tdial, 14) exited non-zero on 'UCX/750@750-00000009'
[2024-01-18 17:23:40.124] VERBOSE[6517][C-0000000a] chan_ucx.c: Hanging up UCX/750@750-00000009
[2024-01-18 17:23:55.030] VERBOSE[1580] chan_ucx.c: UCX/750@750-0000000a created for sub 0
[2024-01-18 17:23:55.030] VERBOSE[1580] netsock2.c: Using UCX RTP TOS bits 184
[2024-01-18 17:23:55.030] VERBOSE[1580] netsock2.c: Using UCX RTP CoS mark 5
[2024-01-18 17:23:55.031] VERBOSE[6532] chan_ucx.c: Starting switch on '750@750-0' to 86889
[2024-01-18 17:23:55.031] VERBOSE[6532][C-0000000b] pbx.c: Executing [86889@from-internal:1] Macro("UCX/750@750-0000000a", "user-callerid,LIMIT,EXTERNAL,") in new stack
[2024-01-18 17:23:55.031] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@macro-user-callerid:1] Set("UCX/750@750-0000000a", "TOUCH_MONITOR=1705569835.11") in new stack
[2024-01-18 17:23:55.032] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@macro-user-callerid:2] Set("UCX/750@750-0000000a", "AMPUSER=750") in new stack
[2024-01-18 17:23:55.032] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@macro-user-callerid:3] GotoIf("UCX/750@750-0000000a", "0?report") in new stack
[2024-01-18 17:23:55.032] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@macro-user-callerid:4] ExecIf("UCX/750@750-0000000a", "1?Set(REALCALLERIDNUM=750)") in new stack
[2024-01-18 17:23:55.032] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@macro-user-callerid:5] Set("UCX/750@750-0000000a", "AMPUSER=750") in new stack
[2024-01-18 17:23:55.033] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@macro-user-callerid:6] GotoIf("UCX/750@750-0000000a", "0?limit") in new stack
[2024-01-18 17:23:55.033] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@macro-user-callerid:7] Set("UCX/750@750-0000000a", "AMPUSERCIDNAME=Pan 750") in new stack
[2024-01-18 17:23:55.033] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@macro-user-callerid:8] GotoIf("UCX/750@750-0000000a", "0?report") in new stack
[2024-01-18 17:23:55.033] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@macro-user-callerid:9] Set("UCX/750@750-0000000a", "AMPUSERCID=750") in new stack
[2024-01-18 17:23:55.033] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@macro-user-callerid:10] Set("UCX/750@750-0000000a", "__DIAL_OPTIONS=Ttr") in new stack
[2024-01-18 17:23:55.033] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@macro-user-callerid:11] GotoIf("UCX/750@750-0000000a", "1?keepcid") in new stack
[2024-01-18 17:23:55.034] VERBOSE[6532][C-0000000b] pbx_builtins.c: Goto (macro-user-callerid,s,13)
[2024-01-18 17:23:55.034] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@macro-user-callerid:13] GotoIf("UCX/750@750-0000000a", "0?limit") in new stack
[2024-01-18 17:23:55.034] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@macro-user-callerid:14] ExecIf("UCX/750@750-0000000a", "1?Set(GROUP(concurrency_limit)=750)") in new stack
[2024-01-18 17:23:55.034] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@macro-user-callerid:15] ExecIf("UCX/750@750-0000000a", "0?Set(CHANNEL(language)=)") in new stack
[2024-01-18 17:23:55.034] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@macro-user-callerid:16] GotoIf("UCX/750@750-0000000a", "1?continue") in new stack
[2024-01-18 17:23:55.035] VERBOSE[6532][C-0000000b] pbx_builtins.c: Goto (macro-user-callerid,s,29)
[2024-01-18 17:23:55.035] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@macro-user-callerid:29] Set("UCX/750@750-0000000a", "CALLERID(number)=750") in new stack
[2024-01-18 17:23:55.035] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@macro-user-callerid:30] Set("UCX/750@750-0000000a", "CALLERID(name)=Pan 750") in new stack
[2024-01-18 17:23:55.035] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@macro-user-callerid:31] Set("UCX/750@750-0000000a", "CDR(cnum)=750") in new stack
[2024-01-18 17:23:55.035] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@macro-user-callerid:32] Set("UCX/750@750-0000000a", "CDR(cnam)=Pan 750") in new stack
[2024-01-18 17:23:55.035] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@macro-user-callerid:33] Set("UCX/750@750-0000000a", "CHANNEL(language)=en") in new stack
[2024-01-18 17:23:55.036] VERBOSE[6532][C-0000000b] pbx.c: Executing [86889@from-internal:2] Set("UCX/750@750-0000000a", "ROUTE_ID=4") in new stack
[2024-01-18 17:23:55.036] VERBOSE[6532][C-0000000b] pbx.c: Executing [86889@from-internal:3] Set("UCX/750@750-0000000a", "ROUTE_CIDSAVE="Pan 750" <750>") in new stack
[2024-01-18 17:23:55.036] VERBOSE[6532][C-0000000b] pbx.c: Executing [86889@from-internal:4] Set("UCX/750@750-0000000a", "MOHCLASS=default") in new stack
[2024-01-18 17:23:55.037] VERBOSE[6532][C-0000000b] pbx.c: Executing [86889@from-internal:5] Set("UCX/750@750-0000000a", "_NODEST=") in new stack
[2024-01-18 17:23:55.037] VERBOSE[6532][C-0000000b] pbx.c: Executing [86889@from-internal:6] Gosub("UCX/750@750-0000000a", "sub-record-check,s,1(out,86889,)") in new stack
[2024-01-18 17:23:55.037] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@sub-record-check:1] Set("UCX/750@750-0000000a", "REC_POLICY_MODE_SAVE=") in new stack
[2024-01-18 17:23:55.037] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@sub-record-check:2] GotoIf("UCX/750@750-0000000a", "0?dontrecord") in new stack
[2024-01-18 17:23:55.037] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@sub-record-check:3] Set("UCX/750@750-0000000a", "__MON_FMT=WAV") in new stack
[2024-01-18 17:23:55.037] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@sub-record-check:4] GotoIf("UCX/750@750-0000000a", "1?next") in new stack
[2024-01-18 17:23:55.038] VERBOSE[6532][C-0000000b] pbx_builtins.c: Goto (sub-record-check,s,7)
[2024-01-18 17:23:55.038] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@sub-record-check:7] ExecIf("UCX/750@750-0000000a", "0?Return()") in new stack
[2024-01-18 17:23:55.038] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@sub-record-check:8] ExecIf("UCX/750@750-0000000a", "0?Set(__REC_POLICY_MODE=)") in new stack
[2024-01-18 17:23:55.038] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@sub-record-check:9] GotoIf("UCX/750@750-0000000a", "0?out,1") in new stack
[2024-01-18 17:23:55.038] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@sub-record-check:10] Set("UCX/750@750-0000000a", "__REC_STATUS=INITIALIZED") in new stack
[2024-01-18 17:23:55.038] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@sub-record-check:11] Set("UCX/750@750-0000000a", "NOW=1705569835") in new stack
[2024-01-18 17:23:55.038] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@sub-record-check:12] Set("UCX/750@750-0000000a", "__DAY=18") in new stack
[2024-01-18 17:23:55.038] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@sub-record-check:13] Set("UCX/750@750-0000000a", "__MONTH=01") in new stack
[2024-01-18 17:23:55.038] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@sub-record-check:14] Set("UCX/750@750-0000000a", "__YEAR=2024") in new stack
[2024-01-18 17:23:55.038] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@sub-record-check:15] Set("UCX/750@750-0000000a", "__TIMESTR=20240118-172355") in new stack
[2024-01-18 17:23:55.039] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@sub-record-check:16] Set("UCX/750@750-0000000a", "__FROMEXTEN=750") in new stack
[2024-01-18 17:23:55.039] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@sub-record-check:17] Set("UCX/750@750-0000000a", "__CALLFILENAME=out-86889-750-20240118-172355-1705569835.11") in new stack
[2024-01-18 17:23:55.039] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@sub-record-check:18] Goto("UCX/750@750-0000000a", "out,1") in new stack
[2024-01-18 17:23:55.039] VERBOSE[6532][C-0000000b] pbx_builtins.c: Goto (sub-record-check,out,1)
[2024-01-18 17:23:55.039] VERBOSE[6532][C-0000000b] pbx.c: Executing [out@sub-record-check:1] ExecIf("UCX/750@750-0000000a", "1?Set(__REC_POLICY_MODE=dontcare)") in new stack
[2024-01-18 17:23:55.039] VERBOSE[6532][C-0000000b] pbx.c: Executing [out@sub-record-check:2] GosubIf("UCX/750@750-0000000a", "0?record,1(exten,86889,750)") in new stack
[2024-01-18 17:23:55.039] VERBOSE[6532][C-0000000b] pbx.c: Executing [out@sub-record-check:3] Return("UCX/750@750-0000000a", "") in new stack
[2024-01-18 17:23:55.039] VERBOSE[6532][C-0000000b] pbx.c: Executing [86889@from-internal:7] Set("UCX/750@750-0000000a", "CALLERID(all)="Pan 750" <750>") in new stack
[2024-01-18 17:23:55.040] VERBOSE[6532][C-0000000b] pbx.c: Executing [86889@from-internal:8] Set("UCX/750@750-0000000a", "_KEEPCID=TRUE") in new stack
[2024-01-18 17:23:55.040] VERBOSE[6532][C-0000000b] pbx.c: Executing [86889@from-internal:9] Goto("UCX/750@750-0000000a", "ext-trunk,3,1") in new stack
[2024-01-18 17:23:55.040] VERBOSE[6532][C-0000000b] pbx_builtins.c: Goto (ext-trunk,3,1)
[2024-01-18 17:23:55.040] VERBOSE[6532][C-0000000b] pbx.c: Executing [3@ext-trunk:1] Set("UCX/750@750-0000000a", "TDIAL_STRING=SIP/to_IPO") in new stack
[2024-01-18 17:23:55.040] VERBOSE[6532][C-0000000b] pbx.c: Executing [3@ext-trunk:2] Set("UCX/750@750-0000000a", "DIAL_TRUNK=3") in new stack
[2024-01-18 17:23:55.040] VERBOSE[6532][C-0000000b] pbx.c: Executing [3@ext-trunk:3] Goto("UCX/750@750-0000000a", "ext-trunk,tdial,1") in new stack
[2024-01-18 17:23:55.040] VERBOSE[6532][C-0000000b] pbx_builtins.c: Goto (ext-trunk,tdial,1)
[2024-01-18 17:23:55.040] VERBOSE[6532][C-0000000b] pbx.c: Executing [tdial@ext-trunk:1] Set("UCX/750@750-0000000a", "OUTBOUND_GROUP=OUT_3") in new stack
[2024-01-18 17:23:55.041] VERBOSE[6532][C-0000000b] pbx.c: Executing [tdial@ext-trunk:2] Set("UCX/750@750-0000000a", "SCA_TAG=") in new stack
[2024-01-18 17:23:55.041] VERBOSE[6532][C-0000000b] pbx.c: Executing [tdial@ext-trunk:3] GotoIf("UCX/750@750-0000000a", "1?nomax") in new stack
[2024-01-18 17:23:55.041] VERBOSE[6532][C-0000000b] pbx_builtins.c: Goto (ext-trunk,tdial,5)
[2024-01-18 17:23:55.041] VERBOSE[6532][C-0000000b] pbx.c: Executing [tdial@ext-trunk:5] ExecIf("UCX/750@750-0000000a", "0?Set(CALLERID(name-pres)=)") in new stack
[2024-01-18 17:23:55.041] VERBOSE[6532][C-0000000b] pbx.c: Executing [tdial@ext-trunk:6] ExecIf("UCX/750@750-0000000a", "0?Set(CALLERID(num-pres)=)") in new stack
[2024-01-18 17:23:55.041] VERBOSE[6532][C-0000000b] pbx.c: Executing [tdial@ext-trunk:7] Set("UCX/750@750-0000000a", "DIAL_NUMBER=") in new stack
[2024-01-18 17:23:55.041] VERBOSE[6532][C-0000000b] pbx.c: Executing [tdial@ext-trunk:8] GosubIf("UCX/750@750-0000000a", "1?sub-flp-3,s,1()") in new stack
[2024-01-18 17:23:55.041] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@sub-flp-3:1] ExecIf("UCX/750@750-0000000a", "0?Set(TARGET_FLP_3=)") in new stack
[2024-01-18 17:23:55.041] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@sub-flp-3:2] GotoIf("UCX/750@750-0000000a", "0?match") in new stack
[2024-01-18 17:23:55.041] VERBOSE[6532][C-0000000b] pbx.c: Executing [s@sub-flp-3:3] Return("UCX/750@750-0000000a", "") in new stack
[2024-01-18 17:23:55.041] VERBOSE[6532][C-0000000b] pbx.c: Executing [tdial@ext-trunk:9] Set("UCX/750@750-0000000a", "OUTNUM=") in new stack
[2024-01-18 17:23:55.042] VERBOSE[6532][C-0000000b] pbx.c: Executing [tdial@ext-trunk:10] Set("UCX/750@750-0000000a", "DIAL_TRUNK_OPTIONS=Tt") in new stack
[2024-01-18 17:23:55.042] VERBOSE[6532][C-0000000b] pbx.c: Executing [tdial@ext-trunk:11] Dial("UCX/750@750-0000000a", "SIP/to_IPO/,300,Tt") in new stack
[2024-01-18 17:23:55.042] VERBOSE[6532][C-0000000b] netsock2.c: Using SIP RTP TOS bits 184
[2024-01-18 17:23:55.043] VERBOSE[6532][C-0000000b] netsock2.c: Using SIP RTP CoS mark 5
[2024-01-18 17:23:55.069] ERROR[6532][C-0000000b] netsock2.c: getaddrinfo("to_IPO", "(null)", ...): Name or service not known
[2024-01-18 17:23:55.069] WARNING[6532][C-0000000b] chan_sip.c: No such host: to_IPO



Any ideas to resolve it?
 
Sort by date Sort by votes
Do you have anything to add such as how it's was programmed, any symptoms when calling or what does work if any?
Detail might help the pro's of this system type.

Could even be the IP Office? it does appear the 250 cannot find the 500.


small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
Upvote 0 Downvote
The SIP trunk configuration on the UCX side is wrong. Based on the log entries you provided, the hostname value appears to be set to "to_IPO". The hostname must be set either to a hostname that can be resolved by DNS or to the IP address of the other system. The text "to_IPO" is not a valid host name.
 
Upvote 0 Downvote
Dear @UCXguy,
Thanks for your advise and I did make some changes in UCx250:


Peer detail of the SIP trunk in UCx250:
host=192.168.40.1
type=peer
qualify=no
insecure=very
dtmfmode=rfc2833
context=from-trunk
trustrpid=no
sendrpid=no
canreinvite=no
allow=alaw,ulaw
disallow=all

But after changing the configuration both in UCx250 and IPO500, I still got the following problems:

1. From Ucx250 to IPO
- Incoming call to IPO from UCx250, the IPO extension was ringing and I picked up the IPO phone but it showed it was still "dialling" until timeout. (please refer the attached log file.

2. 1. From IPO to Ucx250
- Incoming call to UCx250 from IPO, the IPO extension showed "WAITIN-FOR-LINE" with fast busy tone.

 
Upvote 0 Downvote

1. From Ucx250 to IPO
- Incoming call to IPO from UCx250, the IPO extension was ringing and I picked up the IPO phone but it showed it was still "dialling" until timeout. (please refer the attached log file.


in UCx250

- Outbound prefix =8 match pattern = . (8 is the access code; destination = .)

in IPO
- ICR "18/." (line group ID =18, Destinations =.)


2. 1. From IPO to Ucx250

- Incoming call to UCx250 from IPO, the IPO extension showed "WAITIN-FOR-LINE" with fast busy tone.

in IPO
- add short code as "86N/dail/N/72" (86 access code, 72 is the ARS)
-ARS "N;/N/18" (line no. 18)


in UCx250

- trunksequence for Matched Routes 0 = IPOffice
-Trunks =IPOffice
- Inbound = IPOffice
- Set Destination Extensions = 740 (extension no.)
- Inbound Routes - add extension 740
- Set Destination = Extensions/740

Hope it can help.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

koalaman
  • Locked
  • Question
UCx250 web access
Replies
5
Views
352
ucxguy
ucxguy
MoJHK
  • Locked
  • Question
UCX250 group change and recording file download
Replies
0
Views
115
MoJHK
MoJHK
MoJHK
  • Locked
  • Question
Install Avaya 1416 in Emetrotel UCx250
Replies
1
Views
200
MoJHK
MoJHK
JM2009
  • Locked
  • Question
Emetrotel e1 trunk forward to local extensions 1
Replies
5
Views
547
Alfordap
Alfordap
MoJHK
  • Locked
  • Question
Second directory and analog trunk in Emetrotel phone
Replies
3
Views
242
MoJHK
MoJHK

Part and Inventory Search

Sponsor

Back
Top