Setting up wireless network problems

[moonpig]

I am running a Windows Server 2003 network with 2 network cards - 1 card connects to the internet via a cable modem and gets its IP address dynamically, the other card connects to the internal network with the IP address of 10.0.0.1. I have setup NAT and internet access is OK.
I have since installed a wireless network card and given it the IP address 10.0.1.1.

The problem is that internet access has stopped completely, but when I disable the wireless card it works again. Does anyone have any ideas? I have tried different default gateways and DNS addresses, even tried setting the internal LAN card on the server to a metric of 1 and the wireless metric to 2.

Thanks in advance

 

[SkyhiKeeper]

The problem occurs is that the gateway is proberly the router, either you have to bridge the cards or enter a static route into the windows routes.