Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
setting up PROCOMM for option 81C
- Thread starter espen19
- Start date
NTOldTimer
Programmer
Depends on what card you are connecting it to in the PBX. Also print out and post here the programming of the port.
Ex >LD 22
REQ PRT
TYPE ADAN TTY x (x is the TTY number for the port)
Ex >LD 22
REQ PRT
TYPE ADAN TTY x (x is the TTY number for the port)
if your connecting to the core, j25 on the active side, it's 96 8 none and 1, the other tty's are either soft or hard coded, after you get in through the core you'll be able to see the adans, for the paddle boards, you'll need to look at the switch settings
john poole
bellsouth business
columbia,sc
john poole
bellsouth business
columbia,sc
- Status
Similar threads
- Locked
- Question
- Locked
- Question