Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Setting up phantom tn's

Status
Not open for further replies.

lowvo

Technical User
Mar 17, 2006
37
I work on an option 61 and would like to see if it has phantom tn's installed, how can I check it and if they are not installed what is the steps to do so?
 
LD 97. At REQ PRT, TYPE SUPL then just keep hitting return. Any Loop with an N before the loop number is a Phantom Loop.

You can also print them in ld 22 under CEQU.
 
There are no phantom tns installed when I check ld 97. What are the steps to add some?
 
I have check CFN in ld 22 and under SUPL I only have 04 nothing else. Do I need to go into ld 97 and do a chg to under supl to get the phantoms programed?

 
anytime you need a new loop, add a supl 1st

john poole
bellsouth business
columbia,sc
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top