Setting up New parter system

[killa200]

I recently recieved a partner system with a partner plus R2.0 processor and a 206E board in it. I didn't recieve any of the phones, so i am wonderinf is there any sowftare for a pc i can use to emulate a system phone that will work with this?

 

[skip555]

look at the FAQ at the top of the page for a link to avaya for manauls

no software Im aware of to emulate a phone

 

[itpphoneguy]

Hi killa200,
You must use a display phone at ext 10 or 11 to program this early system. ACS 3.0 is the first you can dial into.
You have a really old system, things get much nicer to work with as the system release gets more current. As noted above, the system programming manual can be found at http//support.avaya.com. It's an easy system to use.
-Chris

 

[killa200]

well thanx guys, at least i tried to look for one, i'll keep in touch when i can afford a display phone and set up.

Thanx again

 

[itpphoneguy]

Hi killa200,
You can get old MLS 12D and 18D sets pretty cheap. Beware of bad / intermittent buttons and led's. That little system can do a lot.
-Chris