Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Setting up Feature 982 night line button on BCM 400 3
- Thread starter parm2013
- Start date
-
1
- #2
Splic3d
Vendor
- Dec 28, 2012
- 499
I my be miss understanding your post, but Night services is F871. F982 is attendant status. To program a buttom - F*3, choose button, dial in F871.
If its not working, get a bigger hammer!
Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
If its not working, get a bigger hammer!
Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
- Thread starter
- #4
- Thread starter
- #5
-
1
- #6
curlycord
Programmer
What post is that?
None of the 3 sentences you wrote have anything to do about programming a button.
Lets rephrase since a night button can be anything.
What is it you are trying to accomplish?
-Program a service mode button so that auto attendant or particular phones answers calls at night? (F871)
-Tell the system that the attendant is not available for the night (F982)
F982 default password most certainly is a number but it does spell a word as well.
Please try not to be so brief so we don't have to keep asking too many questions,close out the threads you started with the resolution and also you still have not answered one of them in the general forum about.
People take the time to reply and help so it's nice when you return the favor.
Thanks!
=----(((((((((()----=
curlycord
Toronto Canada
None of the 3 sentences you wrote have anything to do about programming a button.
Lets rephrase since a night button can be anything.
What is it you are trying to accomplish?
-Program a service mode button so that auto attendant or particular phones answers calls at night? (F871)
-Tell the system that the attendant is not available for the night (F982)
F982 default password most certainly is a number but it does spell a word as well.
Please try not to be so brief so we don't have to keep asking too many questions,close out the threads you started with the resolution and also you still have not answered one of them in the general forum about.
People take the time to reply and help so it's nice when you return the favor.
Thanks!
=----(((((((((()----=
curlycord
Toronto Canada
-
1
- #7
norstarboy125
Vendor
I think cook cleared this one up a few threads ago.
Charm City Communications
Charm City Communications
- Thread starter
- #8
curlycord
Programmer
Ok that is "Service Mode" button you are trying to program.
You need to go into "Control Sets" and enter that DN to be allowed to use that feature.
=----(((((((((()----=
curlycord
Toronto Canada
You need to go into "Control Sets" and enter that DN to be allowed to use that feature.
=----(((((((((()----=
curlycord
Toronto Canada
- Thread starter
- #10
curlycord
Programmer
Looks like you found it in another post you just started on the same topic?
=----(((((((((()----=
curlycord
Toronto Canada
=----(((((((((()----=
curlycord
Toronto Canada
- Thread starter
- #12
Curly. I am trying to lean from you
Thought I would make myself clear in a new post
This post was for Feature 982
The new post is for F871
Either one there seems to be no answer
The service is programmed in the button, yet accessed denied in admin
Thought I would make myself clear in a new post
This post was for Feature 982
The new post is for F871
Either one there seems to be no answer
The service is programmed in the button, yet accessed denied in admin
- Thread starter
- #13
- Status
Similar threads
- Locked
- Question