Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Setting up External paging #600 for incoming ringing on P.A. speakers

Status
Not open for further replies.

phonerookie2

Programmer
May 6, 2010
17
US
Hey gang,
Panasonic TDA50 --
How/where do I enter floating external page number 600 so when incoming co rings it will also ring through ksu paging port/speakers. I gave this a whirl by added it to main ICD group 601 as a "member/extension"....no luck...assigned in Operator/floating extension ....no luck... when I replace 601 in CO DIL to it- 600- it works for just that- rings out system paging port (just did this for testing) I understand this system will do this so I don't have do buy other physical paging equipment with ringing/SLT hookup...
 
It will only works when dil/ddi to 600. Can’t have it in a group.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top