Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Setting up DSS Unit

Status
Not open for further replies.

THEITDR

IS-IT--Management
May 4, 2009
3
US
I need to program a DSS unit to a users station. I have already setup an extn on the unit but have been unable to find the programming process to tell the system that extn is a DSS unit. Anyone have the process? Or know where it is in the user guide. THanks
 
Flash 50, put in the ext range for that ext. (example: 101 101 HOLD). I believe it is page B and button #1. Best way I remember is to go in and press 1 HOLD, 2 HOLD, ect until you see the DSS show up in the LCD screen. I believe though when you do the DSS you have to add the ext it is tied to as well.

------------------------------------
Dallas, Texas
Telecommunications Tech
CCVP, CCNA, Net+

CCNP in the works
 
Thanks, I got it. The part I was missing was programming the DSS extn to associate with the voice extn.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top