SETTING UP DHCP IN A MIXED ENVIRONMENT (NT/WK2)

[Pugdog]

We presently have one static publice network. I would like to implement a second private network using dhcp. I have a cisco 2600 router with two serial and one ethernet cards. The problem is I cannot get the dhcp to clients to obtain an address. I have the default gateway set to a server 2000 rras.

 

[criticalUpdate]

check out the udp helper commands to pass DHCP.
Jeff

 

[Pugdog]

the specific error is
LAN: DHCP server unreachable.
If I change the ip to static in the new network I can ping both routers. It is only when I try dhcp. I am not sure what udp helppers are.

 

[criticalUpdate]

If I understand you properly your DHCP is not going across the router. This is by design. You need to change some things in the router. Check out the link to get more info.

http://www.cisco.com/warp/public/473/winnt_dg.htm#xtocid88299

Jeff

 

[Pugdog]

Thanks for you help,
Clarification--I am attempting to use RRAS on a windows 2000 server. Do I still need to enable dhcp relay on my cisco 2600 router.