Setting up a Speed Call List?

[PTALLY]

Hello,


I wanted to know how I could setup a speed call list on my switch. I have Meridian Option 61C R25 currently. If anybody could help me out with the commands to do this I would really appreciate it.

Thank You,

PTALLY

 

[glynnmsg]

I hope this helps:

>ld 18
SCL000
REQ new
TYPE scl
LSNO (Enter number)
DNSZ (Length of telephone number)
SIZE (number of entries that the list can have)
WRT (ADDS: MEM: 312 DISK: 0.6)
STOR

 

[johnpoole]

that post is correct, also go to 20 and print scl return.. that is a list of all used scl's find a empty number and build a new one, you can put the numbers on it from the screen or the station. users tend to do it themselves so they know how to change it.. if your switch is average, you'll have several that are unused.. make one users a ssc (speed call controller) and others in that dept a ssu (speed call user) or just build a new one for each phone. the key are scc 20 or ssu 20..for scl 20, i use ssu for all my phones except the one on the desk. the frame and switch phones are users

john poole
bellsouth business
columbia,sc

 

[PTALLY]

Thanks for all your help you both helped me out.

PTALLY