hi i have a nokia ip350/380 firewall
i nered some help getting it set up i have little or no docs/sw as i got it second hand
i got a copy of the checkpoint management clients
(\fw41_sp3_w32_gui)
i basically need to get the initial setup of say the first eth1 to a lan ip, i think
i hav connected a com session to it and have done the
(mv /config/active /config/active1.old) to reset it
and then did the /etc/overpw to reset the admin password
so i now should have eth1 set to 10.10.1.254/8
vlan: 2
my lan is 10.10.1.0, a ISA box is the main router at mo 10.10.1.1
i set the FW hostname to hades
but when i try to ping 10.10.1.254 from 10.10.1.1 i get no reply and yet see activity on the eth1 LED of the FW
i get request timed out
any ideas anyone?
i nered some help getting it set up i have little or no docs/sw as i got it second hand
i got a copy of the checkpoint management clients
(\fw41_sp3_w32_gui)
i basically need to get the initial setup of say the first eth1 to a lan ip, i think
i hav connected a com session to it and have done the
(mv /config/active /config/active1.old) to reset it
and then did the /etc/overpw to reset the admin password
so i now should have eth1 set to 10.10.1.254/8
vlan: 2
my lan is 10.10.1.0, a ISA box is the main router at mo 10.10.1.1
i set the FW hostname to hades
but when i try to ping 10.10.1.254 from 10.10.1.1 i get no reply and yet see activity on the eth1 LED of the FW
i get request timed out
any ideas anyone?