I am trying to setup What's Up Gold to monitor a network behind a firewall. How can I setup the router to allow pinging or monitoring of just the main servers? I am trying to setup IP forwarding but that isn't allowing me to ping the servers. I did upgrade the firmware to 1.45 but that didn't help. Linksys support professional couldn't help me because he didn't know what a T-1 line was. Any help would be appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Setting Up A Linksys Router for Pinging behind a firewall
- Thread starter tcoy
- Start date
OpenBsdRulez
Technical User
Please re describe what you want to do ?
because I dont get a clue from where do you want to monitor wich network from behind the firewall the inside network or something like that?
Because what's up gold also has a function of a web interface if you want to view this from outside your firwall you will need to use rdr in your pf.conf
But I'm really not sure if this is what you want to do
for rdr and pf see:
If this is what you want to do and you can not figure out how try posting here again I'll look for follow ups
OpenBSDRulez
because I dont get a clue from where do you want to monitor wich network from behind the firewall the inside network or something like that?
Because what's up gold also has a function of a web interface if you want to view this from outside your firwall you will need to use rdr in your pf.conf
But I'm really not sure if this is what you want to do
for rdr and pf see:
If this is what you want to do and you can not figure out how try posting here again I'll look for follow ups
OpenBSDRulez
- Status
Similar threads
