Setting time in CS1000e 5

[Q6600]

Im trying to change the time in a cs1000e and its not letting me with LD 2 / STAD. I read that you need to login with "admin2" but I dont have that login, just admin.

Actually what Id really like to do is setup an NTP server.

When I do LD 117, CHG NTP IPADDR I get:

Command not Supported on Linux Call Server, please use "Base Manager" instead.



Thanks for any help.

 

[NortelGuy1979]

You're on a CS1000E CPPL Co-Res R6.0 it looks like, you must set it from UCM --> Base Manager. You need UCM credentials.

Matthew - Technical Support Engineer

http://www.linkedin.com/in/matty79

 

[Q6600]

I found the Base Manager, fixed the time. (added a time server)

Thanks Nortel4Matt!