Setting the diversion on no answer

[jaylek]

Hai,

Where there is any option to set the diversion time for each extension (for eg. 555 wants diversion after 6 rings,666 wants a diversion after 4 rings ,777 needs the diversion after 3 rings...)The Exchange is BC10 CNA 140/R2A

Thanks ,

 

[shaun123]

you cant have diff divert times as its set in the system data
ie do a sytdp and look at cdnal and cdnas these are the divert times long and short thios is the only place you can alter divert times but this affects the times system wide ie for everybody

 

[jaylek]

Hai shaun123,

Thanks for the reply.

Jaylek

 

[NIUX]

Hi Jeylek,

You can use the PE commands,

PELPIIR=555,ANSPOS=555,TIME=YY,CHO=1;
PELPIIR=555,ANSPOS=XXX,TIME=YY,CHO=2;

Where: XXX is the div. address.
YY is the needed div. time for ext. 555 (2-60 sec.)
You can add CHO=3 till 5 to repeat the div. to other locations with different times.

BR///

 

[jaylek]

Hai NIUX,

Thanks for the information.

Regards

Jaylek.