Setting DST on a CS1000S

[ELBeast]

Hi, I am trying to set DST for our CS1000S; I am trying to do this for the 2007 year, since it wasn't setup previously and I had to manually do it this morning. These are the instructions I am using:

You must turn it on in LD 02

- BWTM <month> <week> <day> <hour>
month = 1-(10)-12 [January-December]
week = (1)-5, L [1st-5th, L is the last week of the month]
day = (1)-7 [Sunday-Saturday]
hour = 1-(2)-22 [Midnight-11:00 pm]
- SDST ON, (OFF)
ON enables the automatic change capability
OFF disables the automatic change capability
-TDST <CR>
The output reflects the input format to indicate the change information.

This is what I am trying to input:
FWTM MAR 3 SUN 11 AT 02:00:00
BWTM NOV 2 SUN 4 AT 02:00:00

but when I do TDST to verify my input I get:
FWTM APR 1 SUN 2 (AT 02:00 2/4/2006 )
BWTM NOV 2 SUN 4 (AT 04:00 12/11/2006 )

I can't seem to change it at all? Is there a way to remove or zero out these entries?

Thanks in advance.

 

[PERRYPJ]

Forget about it, nortel working on fix for new DST. Get your check books out.

OLD ROLMEN WORKING ON NORTELS

 

[ELBeast]

Thanks, good to know!

 

[wakeboardTX]

try
FWTM 03 2 1 2
and
BWTM 11 1 1 2