Setting date on iS3030 1

[mautas]

Hi,

I'm a total newcomer to the Sopho iS3030 and I have no technical reference. To begin with, I'd like to know what command lets set the system date and time. Thanks in advance,

Mauricio.

PS: I have a PC with the 2.0 management software (1995) connected to the Sopho's programming port.

 

[wernergo]

Hi mautas

SEDATI : <YEAR>,<MONTH>,<DAY>,<DAY-OF-WEEK>,<HOURS>,<MINUTES>;

Greets

 

[mautas]

Thanks wernergo,

Only doubt is <DAY-OF-WEEK> begins with 0=sunday?

Greetings.

 

[wernergo]

hi,

seven days
1 monday 7 sunday
which softwarerelease is running?
its possible to set day and time automatically via ISDN

greets
wernergo

 

[escaliber]

I'm Afraid it will not take the clock of the ISDN.
IT can Synchronies of a SSM410 and then it takes the time of the PC, thats if you have one.
IF you are having trouble with the clock keeping time, its
Possibly due to the small lithium battery on the cpu i think
or it could be the GBU.

regards
Escaliber

 

[wernergo]

Hallo escaliber and mautas,
the question was, how to set date and time in an is 30xx system. Here it is possible with the correct bundlesettings with call@net 2.9 or higher, to do synchronisation of date/time.

bundle-option
O. ISDN date/time synchronisation (0=no / 1=yes)?

ISDN date/time synchronisation (since Call@Net 2.9) adjusts the date and time of the
ISPBX to the time provided by PSTN service provider via ISDN trunks. The functionality
allows automatic switch over to daylight-savings-time.
When 'O' is yes, NESYSOP 132 must be TRUE.

You wrote:
IF you are having trouble with the clock keeping time, its
Possibly due to the small lithium battery on the cpu i think
or it could be the GBU.

Thats correct, I know it.

I hope you can understand my bad english, it is very difficult for me to write.

regards to all from Schwerin/germany

 

[escaliber]

Hi wernergo
In the reply you add its correct and you know to which part.
is it the GBU or the lithium battery which keeps the clock.

Its just for futre referance

ta