hoosier121
MIS
Hi all,
Instead of doing this:
This.column1.Sparse = .F.
This.column2.Sparse = .F.
This.column3.Sparse = .F.
This.column4.Sparse = .F.
This.column5.Sparse = .F.
Is it possible to set all of these to .F. with either the setall command or a loop? If so, Tips would be appreciated.
John
Everything I needed to know I learned from Yoda.
Instead of doing this:
This.column1.Sparse = .F.
This.column2.Sparse = .F.
This.column3.Sparse = .F.
This.column4.Sparse = .F.
This.column5.Sparse = .F.
Is it possible to set all of these to .F. with either the setall command or a loop? If so, Tips would be appreciated.
John
Everything I needed to know I learned from Yoda.