Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Set CAD function on key

Status
Not open for further replies.

EndreMD

Technical User
Sep 22, 2019
38
RO
Dear members !
Could you help me please how to set a function-key on a DTS to activate a call diversion by pressing that key ?
For example: if KEY02 is pressed and keylight is on, the incoming calls diverts to my mobile nr. By now I set KEY=02 to FCN=CAD and if I dial *22#mobile_nr# it works the diversion, the light is on and also the deactivation works by pressing KEY02, but it would be much easier if this could be work by pressing only a function-key not that much characters.
Thank you !
 
Thanks Graber !
Probably I made a stupid think, it still doesn't work. Here is what I made, please send me the correct solution:

KSFKC:DIR=20020,KEY=02,DIG=A22Bmobile_numberB,FCN=PEN;
NOT ACCEPTED
LIST NUMBER
NOT ALLOWED

If I put:
KSFKC:DIR=20020,KEY=02,DIG=A22Bmobile_numberB,FCN=TNS; - then when I press KEY02 the deviation is active and it works well but I want to have the deactivation also on KEY02 to work. Regards.

 
Hi
Do You know personal number facility?
You must create personal list for extension 20020 using command PELPI
for example:
PELPI :DIR=20020,LIST=1,CHO=1,ANSPOS=mobile_number,TIME=60;
then
KSFKC:DIR=20020,KEY=02,FCN=PEN,DIG=1;
 
Dear Graber!
Thank you very much for your help, I didn't know the call_list command's whole facilities, I also have to study the PEN function.
A really useful forum, hi guys and all the best !
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top