Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SES Sip Enablement Server R3.0

Status
Not open for further replies.
DTGMI

DTGMI

Vendor
Jun 1, 2006
243
US
Have an S8500B that lost a drive and we have to reload from scratch ...

SES CCS-3.0.0.0-031.0 is the SIP Server load.

Can't remember is CM has to be loaded first? Our records shows CM 3.00.0.343.3 was loaded but that might have been on their S8700.

I can only find the SES R3.1 Implementation - Install manual on our doc server. Shouldn't be much different than R3.0??

Anyone still around that remembers SES R3?

Thanks
 
Status
Not open for further replies.

Similar threads

lopes1211
  • Locked
  • Question
ASBCE Missing Authentication Tab in the SIP Server provider config
Replies
1
Views
262
Devin_H
D
letman2
  • Locked
  • Question
EZ500 with sip trunks
Replies
3
Views
337
ZeroZeroOne
ZeroZeroOne
Alaskatelecom
  • Question
SIP J179 and Call Park - not working
Replies
2
Views
112
JefferP
JefferP
X
  • Locked
  • Question
SIP phone password best practice
Replies
4
Views
679
kyle555
kyle555
M
  • Locked
  • Question
AVAYA 1603SW Firmware for SIP
Replies
6
Views
877
Muller7777
M

Part and Inventory Search

Sponsor

Back
Top