I have a Netfinity 5000 with a ServRAID 3L running 6.10.24 (drivers and firmware all the same). When I upgraded to this version three weeks ago, everything went just fine.
Yesterday I loaded up the ServRAID Manager and it says "No controllers were found in this system" in the status window at the bottom and Number of controllers is 0 in the window to the right.
The server is running fine. It's setup RAID 5, 4 primary with a HS, and I see no errors in the event logs. The controller card shows up as working fine in the Device Manager.
I'm not sure what to do. I'm having problems with my tape backup right now, so I can't take a chance on a reboot at this time (hopefully tape drive will be operational again today).
TIA
I'm Certifiable, not certified.
It just means my answers are from experience, not a book.
Yesterday I loaded up the ServRAID Manager and it says "No controllers were found in this system" in the status window at the bottom and Number of controllers is 0 in the window to the right.
The server is running fine. It's setup RAID 5, 4 primary with a HS, and I see no errors in the event logs. The controller card shows up as working fine in the Device Manager.
I'm not sure what to do. I'm having problems with my tape backup right now, so I can't take a chance on a reboot at this time (hopefully tape drive will be operational again today).
TIA
I'm Certifiable, not certified.
It just means my answers are from experience, not a book.