ServerEdition/ApplServer Backup on 11.1.1.0 Build18

[dergniz]

Hi,

is someone able to make a backup via http on themselves with a ServerEdition/ApplicationServer

- http is active in 7071
- hdd is extended to 200GB
- remote server = <own-ip>; port= 8000; Remote Path = /avaya/backup

it begins wirh [Prepare Backup] -> e.g. [VM Pro 30%] -> Backup failed: Pushing backup files stage failed
the same error with https (port 5443)

with ftp it works

greets
Roland

 

[sizbut]

HTTP is not enabled by default, there is an option in the web control menus to enable it. But backing up to yourself is not a backup!

Stuck in a never ending cycle of file copying.

 

[dergniz]

Hi sizbut,

as you can read above HTTP Option is ENABLE

the question was:

are you able to do an backup?

greets

Roland

 

[Johnhyde]

I have the same problem on 11.0.4.4 - raised a case with Avaya - the only answer they had was to upgrade to the latest and then raise another case.

FTP worked for me too, but that won't back up the IP500 gateways.

Thanks

 

[ccctech]

This works for me. From WebManagement via port 7071, Settings>System> check the box Enable HTTP file store for backup/restore

From WebManagement via port 7070, setup a Remote Server Using the settings below.
Server Name = <Whatever you want it to be>
Protocol = https
Remote Server Address = <it's own IP>
Port = 5443
Remote Path = /avaya/backup
Username and Password fields are blank.

You can move the various backup files from the Server to your PC/Laptop using WinSCP.

Hope this helps.

 

[derfloh]

Should be solved with 11.0.4.4

IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN