SERVER WON'T BOOT Solaris 10

[rafiki47]

Hello,
I rebooted my V440 today and now it will only boot into maitenance mode.

I get a bunch of errors bit this is the first one.

executing start method /lib/svc/method/devices-local timeout override by svc.startd Id.so.1: /sbin/zonecfg_is_scratch: referenced symbol not found.

Does any one know what this means?

 

[rafiki47]

We found a workaround for the zone issue. Now it boots (or doesn't) with the following messages:

Rebooting with command: boot

Boot device: /pci at 1f,4000/scsi at 3/disk at 9,0:a File and args:

SunOS Release 5.10 Version Generic 64-bit

Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.

Use is subject to license terms.

Nov 21 14:04:36 svc.startd[7]: svc:/network/loopback:default: Method
"/lib/svc/method/net-loopback" failed with exit status 1.

Nov 21 14:04:37 svc.startd[7]: svc:/network/loopback:default: Method
"/lib/svc/method/net-loopback" failed with exit status 1.

Nov 21 14:04:37 svc.startd[7]: svc:/network/loopback:default: Method
"/lib/svc/method/net-loopback" failed with exit status 1.

[ network/loopback:default failed (see 'svcs -x' for details) ]

Nov 21 14:04:38 svc.startd[7]: svc:/network/physical:default: Method
"/lib/svc/method/net-physical" failed with exit status 1.

Nov 21 14:04:38 svc.startd[7]: svc:/network/physical:default: Method
"/lib/svc/method/net-physical" failed with exit status 1.

Nov 21 14:04:39 svc.startd[7]: svc:/network/physical:default: Method
"/lib/svc/method/net-physical" failed with exit status 1.

[ network/physical:default failed (see 'svcs -x' for details) ]

Nov 21 14:04:41 svc.startd[7]: svc:/system/device/local:default: Method
"/lib/svc/method/devices-local" failed with exit status 1.

Nov 21 14:04:42 svc.startd[7]: svc:/system/device/local:default: Method
"/lib/svc/method/devices-local" failed with exit status 1.

Nov 21 14:04:42 svc.startd[7]: svc:/system/device/local:default: Method
"/lib/svc/method/devices-local" failed with exit status 1.

[ system/device/local:default failed (see 'svcs -x' for details) ]

Nov 21 14:04:43 svc.startd[7]: svc:/network/service:default: Method
"/lib/svc/method/net-svc start" failed with exit status 1.

Requesting System Maintenance Mode

(See /lib/svc/share/README for more information.)

Console login service(s) cannot run


The /etc/svc/volatile logs contain info like this:
executing start method ("/lib/svc/method/net-loopback")
Timeout override by svc.startd. Using infinite timeout
/lib/svc/method/net-loopback: test: argument expected
Method "start" exited with Status 1

Help!

 

[marrow]

Just built a Solaris10 but have not got any status 1's in /etc/svc/volatile, did you upgrade or initialise? I initialized my system

 

[rafiki47]

This was preconfigured from SUN

 

[KenCunningham]

...and what do Sun say about it?

I don't mind people who aren't what they seem. I just wish they'd make their mind up.