Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Server: No ports left

Status
Not open for further replies.
RPMcMurphy

RPMcMurphy

Vendor
Aug 15, 2007
211
US
New BCM 400, 56 IP licences, 106 vm licences, 6 vm channels. 52 IP sets are registered and when I try to add more IP sets I get a set error "Server:No ports left" BCM monitor/useage indicator/used media card resources/signaling channels 59 of 59 are at 100%. Do the vm channels and IP keycodes coincide? why can i not add the additional 4 ip sets i have keycodes for? Any ideas?

 
Sort by date Sort by votes
Do u have 4 IP DNs registered but showing off-line? They may have been registered some time ago and forgotten. If so, deregister them.

are u using a 2/6 or 3/5 split? How many PECs?
 
Upvote 0 Downvote
Split was set for 2/6, changed to 3/5 and was able to register the rest of the sets.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

gberger
  • Locked
  • Question
Bcm50 R6 no ports left on a remote I2050
Replies
5
Views
196
gberger
gberger
jsaad
  • Locked
  • Question
BCM 400 3.7 vm no light
Replies
9
Views
228
jsaad
jsaad
cndr99
  • Locked
  • Question
BCM400 => Asterisk: no ringing near end ex BCM 2
Replies
10
Views
203
curlycord
curlycord
Steve S.
  • Locked
  • Question
BCM50 issues - nortel logo solid red, no incoming calls after reset
Replies
1
Views
113
curlycord
curlycord
canflyguy
  • Locked
  • Question
I2050 Transfers back to office with no audio
Replies
0
Views
63
canflyguy
canflyguy

Part and Inventory Search

Sponsor

Back
Top