Server Edition Paging

[BIXPRO]

Wondering if anyone else has experienced this or has a suggested fix.
We have a customer with 8.1 Server Edition, one Primary Server with IP sets and a V2 Expansion driving Nortel digital sets via a few DS30A mods. When you page from the digital sets to an IP set, the IP set hears the paging beep, but no voice is carried across after that. IP to IP, IP to DIG and DIG to DIG paging works fine. We tried paging via a HG and the set directly, same results. Regular calls in any direction have no talk path problem.

Any advice or suggestion would greatly be appreciated.
Thx,

JP

 

[hairlessupportmonkey]

tried disabling direct media path on the IP sets and the SCN?

ACSS - SME
General Geek

 

[BIXPRO]

Got permission to reboot last night, still no go with Direct Media path turned off for the H.323 lines between the Primary and Expansion. Also tried removing it from the IP Base Extn on a few sets to test that...still no.

 

[Bas1234]

Where did you fill in the SC and how does it look like?

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool

http://tinyurl.com/bas1234

)
______________________________________