PrimeABTech
Programmer
Hi Folks, it seems like yesterday we had a Primary Server failover to the secondary server. Since then, even with rebooting both Primary and secondary in 7071, Work Place is broken.
Only connecting via 5060. via the DNS as the server address, Domain listed and port 5060.
I get this alarm.
40301739mS ERR: TPKTUser Receive from x.x.x.x: Invalid header tpkt->data[0]==13 tpkt->data[1]==10 tpkt->data[2]==13 tpkt->data[3]==10 tpkt->data[4]==0
40302901mS ERR: TPKTUser Receive from x.x.x.x: Invalid header tpkt->data[0]==13 tpkt->data[1]==10 tpkt->data[2]==13 tpkt->data[3]==10 tpkt->data[4]==0
Anyone have any ideas on the Invalid header?
If I change it to 5061 I can reach the IPO and it sees it, but will blacklist it. Tried to SIP UI whitelist it.
Thoughts?
Only connecting via 5060. via the DNS as the server address, Domain listed and port 5060.
I get this alarm.
40301739mS ERR: TPKTUser Receive from x.x.x.x: Invalid header tpkt->data[0]==13 tpkt->data[1]==10 tpkt->data[2]==13 tpkt->data[3]==10 tpkt->data[4]==0
40302901mS ERR: TPKTUser Receive from x.x.x.x: Invalid header tpkt->data[0]==13 tpkt->data[1]==10 tpkt->data[2]==13 tpkt->data[3]==10 tpkt->data[4]==0
Anyone have any ideas on the Invalid header?
If I change it to 5061 I can reach the IPO and it sees it, but will blacklist it. Tried to SIP UI whitelist it.
Thoughts?