Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Server 2003 Standard - Print Spoolers keep crashing

Status
Not open for further replies.

Contract0

IS-IT--Management
Sep 10, 2007
5
0
0
GB
Running a version of 2003 standard edition, SP2. 22 printers in the office running through this one server, however the print spooler seems to crash and need restarting regually.
I just read of a similar issue on XP whereby reinstalling all the print drivers should resolve the issue, just wanted to see if anyone has some words of advice before trying this as I'm sure it will take a while.

Thanks
 
How long has this been happening? Have you recently installed a new printer driver (this has been known to cause this). Check the Event log for all spooler events to see if there is something amiss
 
All seems to be good after the reinstall.

Appears people were trying to print before turning them them on .. ahh, where would people be without IT support. lol

Thanks for your input itsp.
 
Appears people were trying to print before turning them them on
... and this hangs the spooler?!


"We must fall back upon the old axiom that when all other contingencies fail, whatever remains, however improbable, must be the truth." - Sherlock Holmes

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top