Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Server 2003 Print Server Help 1

Status
Not open for further replies.

sman26

Vendor
Jan 13, 2005
36
US
Equipment:
Server with Server 2003 Standard (Config as DC, DNS and Print Server)
Wkstation running XP SP2 logged into the domain
HP LaserJet 2430dtn networked printer
All have static IP addresses and ping one another fine

Problem:
The Print Sever portion when the client tries to install a network printer from the server is where I am having an issue. The Print Server was set up through CONFIGURE YOUR SERVER WIZARD and had the HPLJ 2430 set up on a standard TCP/IP port and Shared.
When I go to the workstation then and go to ADD PRINTER --> NEXT --> A NETWORK PRINTER OR PRINTER ATTACHED TO ANOTHER PRINTER --> FIND A PRINTER IN THE DIRECTORY --> FIND NOW --> sometimes the printer that is shared on the print server shows up, sometimes it doesn't. When it does show up and I go to add it I get the error message saying, "WINDOWS CANNOT CONNECT TO THE PRINTER. EITHER THE PRINTER NAME WAS TYPED INCORRECTLY, OR THE SPECIFIED PRINTER HAS LOST CONNECTION TO THE SERVER". It found it though and it can ping it so I'm not sure what to do.
Any help in this matter would be appreciated.
Thank you.
Shawn
 
When you install the printer on the Server there is an option to have it published in the directory. If that is not enabled, the "find now" will not publish it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top