Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Serious issue with option 11c

Status
Not open for further replies.
LittleMaster

LittleMaster

Technical User
Sep 16, 2015
182
PK
Getting this error continuously on my terminal..
evtCollSendEvent (): enqueue BUG5325 failed, queue full.

I am not able to login to the system..No PRI is working..There are tones available on TNS.

ANY SUGGESTIONS PLZ...
 
Sort by date Sort by votes
OS RESTART

Communication server 1000 software.
Release : x210550j
.
.
.
.
Unable to find startup script.
PSDL.REC doesn't exist , Rebuilding...

BUG7452 OS 0: WARNING "DEADLINE IN 2min
 
Upvote 0 Downvote
System Controller
Pre-Boot: 03 dev2.37
Flash Boot: NTDK34FB_r02 dev2.54
Reset Reason: C0, 0 - Reset due to Power Up
SRAM: 128 kBytes
DRAM: 32 MBytes, speed=60 ns
Security ID: 10366458 type: NT_STD
System ID: 10366458
Backup Flash: 1572 kBytes
Program Store: 48 MBytes
Flash Drive: 16 MBytes
Dual fibre expansion board #1 installed.
Expansion board #2 not installed.
Ethernet MAC address: 00:1B:BA:F6:6E:C6
PCMCIA card not installed in drive A.
PCMCIA card not installed in drive B.
 
Upvote 0 Downvote
This is the Situation...

*** OS RESTART ***


Communication Server 1000 Software
Release : x210550j
Created : Wed Feb 6 19:29:05 EST 2008
Loaded : 1/6/17 14:37:44

Copyright(C) 1972-2007 Nortel. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1997 Wind River Systems, Inc. All Rights Reserved.
Use of the above software subject to terms of a license agreement.
U.S. Government users subject to "Restricted Rights" under FAR & DFAR.

ssdrvAudit: Found erasable data track: 0-03
### sshServerManager: info [sshServerManagerGenerateNewActiveKey] Key generation
has been started. This may take some time to complete.
Initialize Network Interface.
Network Interface is up.
Host : CP11C
IP Address : 10.64.100.33
Sub-netmask : 255.0.0.0

Unable to find startup script.
PSDL.REC doesn't exist, rebuilding...

BUG7452 OS 0: WARNING "Deadline in 2min"


BUG7453 OS 0: WARNING "Deadline in 1min"


BUG7454 OS 0: WARNING "Deadline in 30s"


BUG7455 OS 0: WARNING "Deadline in 10s"


BUG7416 OS 0: ERROR "tStart Deadline". Restarting with code: 59

Warm Start begun - reason 59


*** OS RESTART ***
 
Upvote 0 Downvote
Your problem will most likely be the software is corrupted on the daughter board that sits on the SSC card. You have a Option 11c (Succession CS1000M?). The problem is that the system can't find the boot-up file and you will need to reload the software via a PCMCIA card or compact flash and a PCMCIA card adapter no greater than 128 megs and usually only the SanDisk cards work with Nortel kit.

You could try using "Ctrl I" from TTY 0 when it tells you on the boot up and see if you can restore the backup file that hopefully will still be on the SSC "Z" drive. You will also require the dongle keycodes for site ID 10366458.
Have you got them?.

I have attached a guide I did some time ago that explains the process but this job is really for someone who knows Option 11 systems well.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Upvote 0 Downvote
Thank you FF ..You are always kind to us.
I do have the license keys for my system but unfortunately I don't have the required release 5.5 software on my PCMCIA..
 
Upvote 0 Downvote
bundle of thanks FF..really appreciated...let me check ...will update soon
one question...i have a backup of my system that i have taken sometime before on my PCMCIA...and i want my system to remain on that backup...do i need to replace any file in the new package ,which you have provided to me with the files of my backup ?...
 
Upvote 0 Downvote
My advice would be to reload the software as shown in the word doc guide and let the SSC card do it's job. Once the system has powered up, you could follow the instructions on restoring the database (assuming that it hasn't been deleted) from the SSC "Z" drive as that copy will be the last one saved my the system as is usually the most recent copy from when it does it's nightly EDD routines.

Only if that has failed, that I would then go for the option to use your backup copy from your PCMCIA card. Don't try to take any short cuts as it will only made it longer to get your system back on line.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Upvote 0 Downvote
My key code sheet is giving following system information..
Software release / issue : 05.50j
Hopefully your uploaded soft will work
 
Upvote 0 Downvote
As long as you have the key codes to match the details below, then you should be OK to load in the software.

Serial Number=10366458
Software Release & Issue 05.50j
Security ID 10366458
Auxilary ID 10366458
SUB TYPE Meridian 1 Cabinet
MODEL OPT11C
FEATURE SET NTSK01HE 05.50j R05.50j
ASIAPAC - PREMIUM SERVICE P
Packages 0-2,4,5,7-14,16-21,23-25,28,29,32-56,58-64
,67,70-77,79-81,83,86-93,95,98-105,107-111,113-120,122-
125,127-129,132-134,137-141,144-155,157,159-164,167,169
,170,172-175,178-188,191-193,195,198,200,202-212,214-21
6,218,219,222,225,229,231,233-236,240,242,243,245-247,2
50,251,253-256,258,259,261,263,283,289,294-297,301,305-
313,315,316,321,323,324,327,328,332,333,335,347-351,362
,364,370,380-382,384,386-389,394,397-401,406-408
Extra Packages 131,284,288,325,329-331
TNS Level 2500
ACD DN 300
AST 1
LTID 0
RAN Connections 0
RAN Routes 500
Music Connections 0
BRAND 2
ACD Agents 10
ANALOGUE TELEPHONES 0
ATTENDANT CONSOLES 2500
BRI DSL 150
CLASS TELEPHONES 248
DATA PORTS 2500
DIGITAL TELEPHONES 16
INTERNET TELEPHONES 0
BASIC IP USERS 0
PHANTOM PORTS 2500
WIRELESS TELEPHONES 0
WIRELESS VISITORS 0
TRADITIONAL TRUNKS 2500
ITG ISDN TRUNKS 0
TMDI D-CHANNELS 64
SURVIVABILITY 0
PCA 0
H.323 ACCESS PORTS 0
SIP ACCESS PORTS 0
SIP CONVERGED DESKTOPS 0
SIP CTI TR87 0
TEMP IP USERS 0

Best of luck!

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Upvote 0 Downvote
thanks again sir...
the installation is successfully done ..everything was installed OK...But now the switch is NOT STABLE and is in the process of WARM START process again and again..here is the OS STARTS process..what can be the issue plz



*** OS RESTART ***


System Controller
Pre-Boot: 03 dev2.37
Flash Boot: NTDK34FB_r02 dev2.54
Reset Reason: 80, 6 - Reset due to CP and AP invoked reset
SRAM: 128 kBytes
DRAM: 32 MBytes, speed=60 ns
Security ID: 10366458 type: NT_STD
System ID: 10366458
Backup Flash: 1572 kBytes
Program Store: 48 MBytes
Flash Drive: 16 MBytes
Dual fibre expansion board #1 installed.
Expansion board #2 not installed.
Ethernet MAC address: 00:1B:BA:F6:6E:C6
PCMCIA card not installed in drive A.
PCMCIA card not installed in drive B.

*** To invoke install setup program from PCMCIA enter CONTROL-I ***

Executing power up self tests
Power up self test passed
DISKOS to be run.
Verifying Diskos.


*** OS RESTART ***


Communication Server 1000 Software
Release : x210550j
Created : Wed Feb 6 19:29:05 EST 2008
Loaded : 1/6/17 21:48:45

Copyright(C) 1972-2007 Nortel. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1997 Wind River Systems, Inc. All Rights Reserved.
Use of the above software subject to terms of a license agreement.
U.S. Government users subject to "Restricted Rights" under FAR & DFAR.

ssdrvAudit: Found unused block which is not erased: 1-05-13
ssdrvAudit: Found unused block which is not erased: 1-06-53
### sshServerManager: info [sshServerManagerGenerateNewActiveKey] Key generation
has been started. This may take some time to complete.
Initialize Network Interface.
Network Interface is up.
Host : PRIMARY_ENET
IP Address : 137.135.128.253
Sub-netmask : 255.255.255.0

Executing startup script "c:/p/etc/startupc".
# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED
# Empty startup file for use in the field.
cd "c:/p/etc"
value = 0 = 0x0

Done executing startup script "c:/p/etc/startupc".
Loading OTM script files......

COM001 Ethernet driver: unit 0 is being restarted

Loading SL1 data

COM001 Ethernet driver: unit 0 is being restarted

COM001 Ethernet driver: unit 0 is being restarted

COM001 Ethernet driver: unit 0 is being restarted

SYS000 SYSLOAD HAS TAKEN PLACE 00000800 00000000 00000000 00000000
CPU 0
SYSDB RLS/ISS: 550J LOADED FROM C: DATE/TIME: 11/12/2005 01:53:56 RECS: 48 SEQNO
: 8
SYSLOAD ISSUE 5.50J: IDLE_SET_DISPLAY NORTEL
COM001 Ethernet driver: unit 0 is being restarted

COM001 Ethernet driver: unit 0 is being restarted

DONE
COM001 Ethernet driver: unit 0 is being restarted

SRPT730 OS 0: Cold Start
Release: x210550j
Created: Wed Feb 6 19:29:05 EST 2008

COM001 Ethernet driver: unit 0 is being restarted

SRPT750 INI 0: INI on side 0 due to System Cold Start

INI000 00000000 21 49 36 00000000 00000000 00000000 00000000 00000000

Total number of files 0

Warning: No corporate directory files were found!
Warm Start begun - reason 36


*** OS RESTART ***


Communication Server 1000 Software
Release : x210550j
Created : Wed Feb 6 19:29:05 EST 2008
Loaded : 1/6/17 21:49:08
Last Restart: 1/6/17 21:49:08
Current Time: 1/6/17 21:50:26

Copyright(C) 1972-2007 Nortel. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1997 Wind River Systems, Inc. All Rights Reserved.

ssdrvAudit: Found unused block which is not erased: 1-05-13
ssdrvAudit: Found unused block which is not erased: 1-06-53
ssdrvAudit: Found unused block which is not erased: 1-07-38
### sshServerManager: info [sshServerManagerGenerateNewActiveKey] Key generation
has been started. This may take some time to complete.
Initialize Network Interface.
Network Interface is up.
Host : PRIMARY_ENET
IP Address : 137.135.128.253
Sub-netmask : 255.255.255.0

Executing startup script "c:/p/etc/startupc".
# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED
# Empty startup file for use in the field.
cd "c:/p/etc"
value = 0 = 0x0

Done executing startup script "c:/p/etc/startupc".
0x207011bc (tRptD): (1/6/17 21:49:59.312) SRPT786 RST 0: Task tSL1 being restar
ted
0x207011bc (tRptD): (1/6/17 21:50:00.270) SRPT782 RST 0: WARM START IN PROGRESS
- Reason 36
Loading OTM script files......

INI000 00000043 21 51 15 00000000 00000000 00000000 00000000 00000000

Total number of files 0

Warning: No corporate directory files were found!


>Warm Start begun - reason 36

DSET000 DOWN LOAD 0 0 0 0 0 0 0 376282

INI002 00000088

INI003 000000B0 000000B4 000000CE 000000D0 000000D4 000000D8 000000EF


*** OS RESTART ***
 
Upvote 0 Downvote
COM001 Ethernet driver: unit 0 is being restarted

Disconnect the Ethernet transciever adapter as I think that this or the cable link is causing the problem, before you power up the phone system.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Upvote 0 Downvote
Ok sir I will check that ...What are these a few lines about ???..Do they indicate any issue with daughter board..?

ssdrvAudit: Found unused block which is not erased: 1-05-13
ssdrvAudit: Found unused block which is not erased: 1-06-53
ssdrvAudit: Found unused block which is not erased: 1-07-38
 
Upvote 0 Downvote
I've seen those "ssdrvAudit: Found unused block which is not erased: 1-05-13" errors before during a bootup. I wouldn't be that worried.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Upvote 0 Downvote
Unfortunately its still has the problem..It's in the loop process of warm startup after ...REASON 36.
I disconnected the Ethernet converter module and reinstalled the OS but still has the problem and giving the Ethernet connection error even it has no Ethernet converter module....
i noticed one thing,, it takes warm restart as soon as it connects to hyper terminal and starts exchange of serial data..I think the serial data interface part of the SSC is having some problem..
Shown here is latest status ...

Total number of files 0

Warning: No corporate directory files were found!

SRPT752 INI 0: INI completed in 23 seconds
Warm Start begun - reason 36


*** OS RESTART ***



Communication Server 1000 Software

Release : x210550j

Created : Wed Feb 6 19:29:05 EST 2008

Loaded : 2/6/17 9:53:40

Last Restart: 2/6/17 9:53:40

Current Time: 2/6/17 9:55:44


Copyright(C) 1972-2007 Nortel. All Rights Reserved.

VxWorks 5.2

Copyright(C) 1984-1997 Wind River Systems, Inc. All Rights Reserved.


ssdrvAudit: Found unused block which is not erased: 2-62-50

### sshServerManager: info [sshServerManagerGenerateNewActiveKey] Key generation has been started. This may take some time to complete.

Initialize Network Interface.


Network Interface is up.


Host : CP11C
IP ADDRESS: XXXX


Sub-netmask : 255.255.255.0



Executing startup script "c:/p/etc/startupc".

# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED

# Empty startup file for use in the field.

cd "c:/p/etc"

value = 0 = 0x0


Done executing startup script "c:/p/etc/startupc".

0x206f0b0c (tRptD): (2/6/17 9:55:16.343) SRPT786 RST 0: Task tSL1 being restarted

0x206f0b0c (tRptD): (2/6/17 9:55:17.300) SRPT782 RST 0: WARM START IN PROGRESS - Reason 36

Loading OTM script files......


INI000 00000043 09 56 35 00000000 00000000 00000000 00000000 00000000


Total number of files 0

Warning: No corporate directory files were found!


> ###HERE IT CONNECTS TO HYPER TERMINAL....
Warm Start begun - reason 36

DSET000 DOWN LOAD 0 0 0 0 0 0 0 477266

INI002 00000088 00000086 00000087 00000080 00000080

INI003 000000B0 000000B4 000000CE 000000D0 000000D4 000000D8 000000EF
ACDR ACTIVATED

XCT007 0 00000003

********OS RESTART******
 
Upvote 0 Downvote
You might have a faulty SSC card. Reboot the system but make sure that everything else is unplugged. That means ALL cards, expansion cabinets etc. All TTY ports and equipment except for TTY 0. Also swap over the power unit if possible. You need to try and reduce the number of possible problems that could be causing it.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Upvote 0 Downvote
Sir you are right..I have also gone through the same procedure of taking out all the cards and PRIS out of the shelf and disconnecting fiber expansion shelf, but the system was not going UP...The SSC seems to be faulty..Will contact with tht local vendor after the weekend for SSC provision..
I will update about any solution that will work for me..
I am really hats off to you sir for your kind interest and help..Thanks FF
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

ATMFIRE
  • Locked
  • Question
OPTION 11C keys actiation
Replies
3
Views
455
Firebird Scrambler
Firebird Scrambler
nihaalrai236
  • Locked
  • Question
Nortel Option 11C RLS 25 asking for "MODL"
Replies
4
Views
729
Firebird Scrambler
Firebird Scrambler
Ozphonebloke
  • Locked
  • Question
Option 11C PSU cct diagram or voltage pinout
Replies
1
Views
327
Ozphonebloke
Ozphonebloke
htroberts
  • Locked
  • Question
how to get into top compartment of 11c cabinet?
Replies
7
Views
383
htroberts
htroberts
LidLock Technologies
  • Locked
  • Solved
Option 11 SDI Cabling
Replies
4
Views
285
bignose21
bignose21

Part and Inventory Search

Sponsor

Back
Top