Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Serial TTY Lock

Status
Not open for further replies.

ElNovato

IS-IT--Management
Jan 2, 2014
20
AR
Hello everybody,
I have a PC that connects via serial to CS1K(core) for capturing CDR. We use Hyperterminal to do that. Today I notice that it is capturing CDR but I cannot programming. I checked that it is connects to the active core.
While we use secureCRT to capture CDR via ethernet.
Help please.
Thanks.



 
you need to check, via another TTY, what that TTY port is capable of doing.

Example:

ADAN TTY 14 <-- Your CDR connection TTY number
CTYP TTY
DNUM 14
PORT 1
DES pty_2
FLOW NO
USER MTC SCH <-- what it is configured for. Your tty may only have CTY programmed so it only sees CDR dats.
TTYLOG 410

John Anaya
Amdocs Inc.
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile
 
Thanks Janaya:
This is the configuration of tty:

>ld 22
PT2000

REQ prt
TYPE adan tty 5

ADAN TTY 5
CTYP CPSI
DNUM 5
PORT 1
DES CONVEXUS
BPS 9600
BITL 8
STOP 1
PARY NONE
FLOW NO
USER MTC TRF SCH
XSM NO
TTYLOG 0
BANR YES

 
That tty port is not configured for CDR and since it is your core, CPSI, You really shouldn't have CDR going to it anyway.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top