Serial port settings 1

[nthnu]

We have a Nortel 1000 and use Phonemaster 4 on Windows XP to connect to the terminal. I can get into the terminal and just found out that LD 17 has system configuration information but don't know how to pull it up. We are building a new Win 7 PC, but are needing to know the LD 17 information for the Phonemaster setup. How would I display/print that info on the screen?
Thanks

 

[Splic3d]

If I am understanding you right, you need the tty port set up info. Go to LD 22. Req - prt, Type - adan tty, return through the rest. That will print all you tty ports.

http://www.i3techgroup.com

If its not working, get a bigger hammer!

Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx

 

[GHTROUT]

This might be on the dip switch settings of a card too. The PBX software does not "always" determine speed, DTE. DCE, etc

You would be much better off getting the settings from the XP version, since you know that works.

~~
Gene at www.GHTROUT.com