Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

serial numbers from digital phones

Status
Not open for further replies.

winter71

IS-IT--Management
Feb 20, 2007
36
US
Just wondering if there is an easy way to retrieve serial numbers from a digital station? I seem to remember reading something along those lines before, but it's been a while ago so I was just wondering if I am incorrect or not.
 
On page 2 of the 'Status Station xxxx' Command it gives you the Connected Station Part ID and Serial Number.
 
Status Station will give you the info on page 2 in 3.1.x
 
Ah! Thank you sirs.. Appreciate that. Now is there a way to get that in a report form if I wanted to pull it for lets say 50 phones?

 
from asa i think you can do sta sta XXXX;sta sta XXXX; etc....
 
then from the txt file, control f to search for all SAC Activated? yes
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top