SERIAL INTEGRATION NIU FOR PHONE SOFT

[642234]

Hi Dokter,

Please can you send me serial integration command for NIU for voice mail with phone soft server. I have Aastar TSW sp 7 version

Thanks

 

[doktor]

1.
Initiate the board:
IOBPI:NODE=NIU,BPOS=;
2.
Create EQU for serial (RS232/V24)voice mail:
IOEQI:EQU=X-X-XX-X,IODEV=GICI9,USAGE=OUT;
3.
Change Baud rate, Parity, Word-length, stopbits:
IOIFC:IODEV=VOICE-GICI9,BAUDR=1200,WORDL=7,STPBIT=1,PARITY=EVEN;
4.
Datachannel:
ICFUI:IFCIND=5,DFMT=5,UPDFCN=NO,FILLER=32,IODEV=VOICE-GICI9;

4.
ICFUC:IFCIND=5,MWF=ALL;

5.
ICMWC:SID=5,KFCN=MWC,DIG=voice mail group number,DTXT=voice mail group number;

Check:

ICFUP:IFCIND=5;
ICMWP:SID=5;

6.
Initiating the Voice Mail ports:

VMFUI:IFCIND=5,VMF=EXTN2,POFMT=2;

VMPOIIR=first member in voice mail group&& last member in voice mail group,PORT=11,IFCIND=5;

VMPOI:GRP=,IFCIND=5;

Check:

VMFUP;
VMPOP;


///doktor
____________________________________

http://www.kandu.dk/spg153996.aspx

 

[642234]

Hi Doktor,

Thanks a lot. I will intiate these commands . Is there any parameter changes in CAT for Analogue extension beacuse i will use analogue extension with phone soft for voice mail.

Thanks.