Separate POTS line for different users 1

[Ludit]

For example, if I have 4 POTS line and group A need to use 1111/2222 and and user group B 3333/4444. Would it be the best way to have each user to have their own Hunt Group and have the first set of numbers of incoming route set to hunt group A and the second set of numbers set to hunt group B?

Thanks

 

[joe2938]

assign incoming line ids to each line each being different then point to the different hunt groups

 

[Ludit]

Set the first set of incoming numbers to incoming ID of 1. Same applies to the second set of numbers to 2 and have the outgoing ID same as 0 due to the ARS default of 0. I would then point the incoming numbers to their respective hundt groups. Sound like a plan! Thanks

 

[Ludit]

Hmmm...
Calling in is working great but does this also works with calling out when other people sees the caller id?
I set the outgoing ID to a different number for each group but I'm still pulling numbers from both groups.

 

[budbyrd]

Two ARS routes. User shortcodes. 9N/dial/(ARS). I usually have overflow routes to the other ARS for 911 reasons. If you changed the out ID you really shouldn't be going out at all if ARS didn't change.

Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'

 

[IPGuru]

you need to have different OG group ID's if you want to specify which line(2) you dial out on
IT is not possible to change the presented CLI on analog trunks.


Do things on the cheap & it will cost you dear