Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sending wrong CLID internally

Status
Not open for further replies.

johnpi

Technical User
Oct 30, 2009
33
US
I need to change the CLID digits I'm sending from one site to our other sites. This is on internal 4 digit calls. It is sending 572 and then the DN and it should send 314 and then the DN. When I try to change the LSC in LD 15 CHG - NET - CLID - LSC it doesn't let me. It acts like it takes the commands but then it isn't changed when I test it. I try to use x's to remove what is there now like the documentation says but that doesn't work either. Here is a piece of the output from PRT CLIDVER in LD 20. The 5724300 should be 3144300. Thanks for any help on this.

REQ PRT
TYPE: clidver
SORTBY yn

SCH0101

SORTBY tn
ESAONLY no
SHORT yes
TN
CUST 0
DATE
PAGE
DES
TN KEY DN ERL CTYP CLID ROUTE CALLED#
----------- ------ ------- ----- ------- ------------------ ----- ----------------
000 0 03 00 00 SCR 4300 NATL 7197195726100
INTL 7197195726100
UDP 7194300
CDP 5724300
 
Can you do a:



>ld 21
REQ: prt
TYPE: clid

then enter through and post what it displays.

Also a ld 20 PRT on 0 0 3 0 please?
 
Here is the PRT CLID
ENTRY 0
HNTN 719
ESA_HLCL
ESA_INHN NO
ESA_APDN YES
HLCL 7195726100
DIDN NO
HLOC 719
LSC 572
CLASS_FMT DN

Here is the PRT of the TN 0 0 3 0
REQ: prt
TYPE: tnb
TN 0 0 30*
TN 0 0 3 0
DATE
PAGE
DES

DES 103
TN 000 0 03 00 VIRTUAL
TYPE 3904
CDEN 8D
CTYP XDLC
CUST 0
ERL 0
FDN 7000
TGAR 1
LDN NO
NCOS 6
SGRP 0
RNPG 0
SCI 0
SSU 0000
LNRS 16
XLST
CLS CTD FBD WTA LPR MTD FNA HTA TDD HFA GRLD CRPD STSD
MWA LMPN RMMD SMWD AAD IMD XHD IRA NID OLA VCE DRG1
POD DSX VMD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDA CFXD ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND FLXD FTTC DNDY DNO3 MCBN
FDSD NOVD CDMR PKCH
CPND_LANG ENG
RCO 0
HUNT 7000
LHK 1
LPK 1
PLEV 02
DANI NO
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 SCR 4300 0 MARP
CPND
NAME John Doe
XPLN 13
DISPLAY_FMT FIRST,LAST
01 SCR 24300 0 MARP
CPND
NAME John Doe XPLN 13
DISPLAY_FMT FIRST,LAST
02 DIG 1 00 R
03 ADL 16 92649499
04 ADL 16
05 ADL 16 7000
06 ADL 16
07 ADL 16
08 ADL 16
09 ADL 16
10 ADL 16
11 ADL 16
12
13
14
15
16 MWK 7000
17 TRN
18 AO6
19 CFW 16 7000
20 RGA
21 PRK
22 RNP
23 SCC 0100
24
25
26
27 CLT
28 RLT
29
30
31
DATE 4 DEC 2006


NACT
 
Are you using CDP's to do this? Check the RLI to make sure that is not inserting the digits as part of the DMI set up in LD 86
 
I think I see your problem


LD 15
REQ: chg
TYPE: net

TYPE NET_DATA
CUST 0
OPT
AC2
FNP
CLID YES
SIZE
INTL
ENTRY 0<-- here you create new Entry Number

Enter to LSC and change it to 314

Then enter all the way through, and the re-print in 21 and let me know if it works.

 
trvlr1, is this the info you needed from LD 86?

prt
CUST 0
FEAT dgt
DMI


DMI 9
DEL 0
ISPN NO
INST 9
CTYP NCHG
 
RyanEOD, thanks that worked. My problem was I did not select entry 0 when I was trying to change the LSC earlier. Thanks for everyone's help.
 
Yeah I was thinking that when I went to map it out myself and saw the LSC after the CLID entry. No problem, just glad it got you working.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top