Send CPName to ISDN tie trunk

[2telguy]

Hi All,

I've set up an ISDN tie trunk to a Cisco gateway. I can connect a call, and when I do a list trace tac *97 (trunk group tac), It sets up ok, but says CP Number 1033 (my extension) and then CP Name No Name, even though the station has a name. I've set up Send Calling Name to y on the trunk group page, etc, but no luck. Any help with this would be GREATLY appreciated.

Thanks!

 

[colby007]

Try changing Codeset to Send Display: 6 Codeset to Send National IEs: 6 on page 1/2 of the trunk form, depending on what level of CM you have. That should do it.

 

[2telguy]

I'll give that a shot. Thanks.