Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

send a fax by Modular Messaging

Status
Not open for further replies.

jamadom93

Technical User
Aug 2, 2006
16
FR
Hello,

We have a MM with a S8700. We received our fax in our mailbox by the MM. But we can not send fax by email.
We have configured fax in voice mail configuration of the MAS. I think dialing rules are ok but for Microsoft Fax Service Manager, not sure.
Have we forgotten something? is there is someone witch happened the same thing?

Thanks a lot

Manu
 
And you are using exchange for the message store? Or MSS

Ken Means

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
 

We use mms with outlook.
When we send a email, we have the reponse:

"Your message to fax=4004@ xxxxxxx.com could not be delivered.
user "fax=4004@xxxxxxx.com" unknown

The undeliverable message is attached "

And that, in internal or external fax number
 
We would need to know what your rel of software is and if you are using the Avaya message store or if you are using Exchange or Domino as the message store.

Ken Means

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
 
OKi,

We are Modulare Messaging V4.0 release 6.2.696.3 and we use the Voice Mail system configuration in the MAS where fax voice mail domain is configured.
There is no exchange or Domino.

I think it miss something in the MAS that it can not send the number of the fax.
 
It is usually more straightforward from a user perspective to send faxes using the fax print driver on the MAS with release 4.0, but if you want to do it as you describe from an email then you will need to make sure that the "From" address can be verified by the MSS as a mailbox subscriber (i.e. the email handle) that has the COS capabilities of Outbound fax calls set to Yes.

Chuck

RCT Technologies

 
That is assuming you have the MSS server as the backend message store since you say you don't have Exchange or Domino.

Chuck
 
Yes we have the MSS server as the backend message store. And i check the COS in my voicemail subscriber and the
Outbound fax calls set to Yes.

Is there any special licence to do that or a particular parameter to configure?

Emmanuel
 
When you are sending a fax and addressing it as TO: fax=4004@ xxxxxxx.com are using the FQDN of the MSS server ? In the MSS IMAP/SMTP logs you should see something come in on the SMTP In Log for this.




Chuck

RCT Technologies
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top