Secondary Dial Tone?

[nsi12000]

We would like the IP403 3.2 system that we are playing with to present as did our old Avaya analog system . Off hook one dial tone (high), dial 9 (or line button) standard dial tone. We've tried to enable "secondary dial tone" in [9] codes but that doesn't seem to do the trick.

Thanks for any help you can give.

 

[Telecomboy]

The IPO has the same pitch for internal and external dialtone. It can be confusing coming from a Partner/Merlin as you may think you are instantly connected to an outside line, but you are not.

 

[hibroth]

The tones were the same on 3.0, since 3.1 the internal and external ones could be different, depending on locale.

The right sintax was: [9]XN/dial/N to specify the external access code, then 9/secondary dial tone/. to match that 9 to the tone.