System is SI, one cabinet: G3siV5(medium), Software R9, ECS. I have installed Primary CDR, connected to PC (with some CDR software) over data module. It works. The customer asked for Secondary CDR. Can I do it, do I need another data module, how do I connect Secondary CDR...Any advice is more then a ...
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Secondary CDR
- Thread starter bancci
- Start date
jackiejack
Technical User
We use a Y cable that you hook up to two devices. This is the cheapest way.
mikeydidit
IS-IT--Management
We use something like a y cable but differant. I ran the cable from our CDR to a rj-45 jack. Looped it in and did not cut it, then ran it to the second machine and put a rj-45 plug on it. Worked very well.
Mikey
Mikey
- Status
