Second DN Ring type change 1

[JonnyBravo1]

Does anyone know if you can change the ring type on a 2616 for calls on the second DN, when the first DN is off-hook. I want to change it from a beep to a ring.

 

[johnpoole]

cls mark fita will give repeated ringing. you can change all the "beeps" to a ring by changing that sound pattern is ld 56 ftc.. just redefine the beep itself as a unique ring or match it to the normal line ring.. remember that is a system wide param and need to be downloaded to the controller cards either with the command or midn

john poole
bellsouth business
columbia,sc

 

[JonnyBravo1]

Rat's! That's what I was afraid of. If it is system wide, I can't do it. Thanks anyway though!

 

[johnpoole]

i like to make it a non interupted ring tone so people answer the phone

john poole
bellsouth business
columbia,sc

 

[Reusser]

In Class of Service

(DRDD) Distinctive Ringing by Directory Number Denied.
DRDA Distinctive Ringing by Directory Number Allowed.

ON key

- DNRO (0)-4 Distinctive Number Ringing index for Outgoing calls
- DNRI (0)-4 Distinctive Number Ringing index for Incoming calls

requires package edrg-24

 

[johnpoole]

try rngb in class, that used to work, back in rls 6 or 7

john poole
bellsouth business
columbia,sc

 

[johnpoole]

that still works on my rls 3, that and cls fita gives repeated ringing on second line

john poole
bellsouth business
columbia,sc

 

[JonnyBravo1]

Once again, you're the man! That did the trick!