Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

second call on intercom line

Status
Not open for further replies.

forcetranquille

Technical User
Feb 13, 2006
218
FR
Hi all,

i have 2 intercom lines on the IP PHone, when i'm busy on the first line, it would like to have a second call only light not ring.
Is it possible ?

French Technical Engineer
 
Is there a DNB on Busy setting you could turn on in programming?
 
u could also setup fwd busy so 2nd call goes to voicemail.
 
Remove it from the phone if your not going to answer it, then it won't ring.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
on the CS1000, when the call forward ( cfw) is activated, the phone does not ring, i would like to do the same thing on the bcm 50

French Technical Engineer
 
You could make it a SCN. and I answered your BCM 50 question in the BCM Forum.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
If you use DND (do not disturb) feature then the 2nd call will just flash on the phone and not ring.
 
Disregard my last post, I'm tired.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
bcm can't do it except for the dnd I suggested. If you want to program it like a cs1000, buy a cs1000.
 
on the CS1000, when the call forward ( cfw) is activated, the phone does not ring, i would like to do the same thing on the bcm 50
French Technical Engineer"

Also on the BCM 50 when the CFW is activated the phone does not ring.







This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top